Welcome to B/R Instruments

The Automaxx 9100 performs ASTM D2892 D5236 crude oil distillation automatically.

• Fully Automatic
• Supports one, two or more distillation columns
• Modular design for quick switch of distillation columns
• Supports boiling flask sizes from 1 to 100 L
• Auto cold trap included
• UPS Included
• Remove fractions at any time
• Turnkey Operation

Easy to Use

PC control automates D2892 and D5236 crude oil distillations from beginning to end. New and experienced operators will find this system simple to use. The software steps you through D2892 and D5236 distillations.

Easy to understand software and easy access to all the distillation components makes performing crude oil distillation as simple as possible

See our crude oil dehydration system

Automatic Control

• Fraction Collector
• Vacuum Control
• Condenser Temperature
• Reflux Ratio
• AET Temperature Calculation
• Distillation Column Heated Jacket Control
• Recording of Distillation Data
• Distillation Rate Control
• Ending of Distillation and Cool Down
• Printing of Report and Distillation Curve

Boiling Flask/Heating Mantle

• Stirring Heating Mantle
• Heated Mantle Top
• Stainless Steel Boiling Flask (optional glass flasks available)
• Quench Coil for Rapid Cooling of the Flask Contents
• PRT Temperature Probe to Monitor Boiling Flask Temperature
• Boiling Flask Sizes 1, 2, 3, 6, 12, 22, 30, 50, 100 liters (Other sizes available)

ASTM D2892 Distillation Column

• According ASTM specifications
• Vertical viewing window for easy viewing
• Highly reflective vacuum jacket
• Heated Jacket to Prevent Heat Loss (Automatically Controlled)
• 15 Theoretical Plates (Other Efficiencies Available)

STM D2892 Distillation Column Sizes, Propak

Diameter	Packed Height	Sample Range
70 mm	91 cm	15-60 liters
50 mm	80 cm	6-24 liters
25 mm	57 cm	1.2-4.8 liters

Other D2892 Distillation Columns
We also offer distillation columns packed with mesh packing (Goodloe) and real plate distillation columns.

ASTM D5236 Distillation Column Sizes

Diameter	Boiling Flask	Sample Range
70 mm	12-24 liters	8-16 liters
50 mm	6-12 liters	4-8 liters
36 mm	3-6 liters	2-4 liters
25 mm	2-3 liters	1-2 liters

Intermediate Receiver/Volume Measurement

• Precision diameter (±0.01 mm)
• Automatic precision volume measurement (±0.1 ml)
• Programmable chamber temperature
• IR level follower eye

Fraction Collector

• 32 Fractions at Each Pressure Level
• Automatic Collection by Vapor Temperature
• Graduate Receivers

Circulating Bath

• Automatic control from PC
• Programmable
• -20 - 100°C
• Low liquid cut off
• Over temperature cut off

Vacuum Operation

• Automatic control
• Programmable

Vacuum Components

• 100-1 mmHg range standard (MKS)
• 1-0.1 mmHg range (MKS)
• Optional 760-100 mmHg range (MKS)
• Automatic control valve (MKS)
• Vacuum pump (Edwards)

Cold Trap

• Automatic cooler included

PC/Monitor

• Included with distillation unit
• Keyboard and monitor integrated into distillation system

Dimensions

• 245 cm x 92 cm x 168 cm (H x D x W)

Power

• 220 VAC, 50/60 Hz

See our crude oil dehydration system

Modular Design

Operate 2, 3, 4 or more different distillation columns with a single system. Just switch distillation modules.

Have the flexibility to easilly add any distillation column or boilng flask size as needed.

Remove Receivers at any Time

Receivers are at atmospheric pressure and so can be removed at any time.

Analyze fractions right away, no need to wait hours for critical data.

Turn key System

Includes everything needed to distill crude oil. All you need is a sample and an operator

See our crude oil dehydration system